| Product name |
Type |
Description |
Release date |
| PCI-1712-AE |
Datasheet |
PCI-1712L_DS |
2009/02/13
|
| Datasheet |
Datasheet of PCI-1712/1712L |
2008/12/19
|
| Driver |
Universal 32-bit Windows Driver for PCI-1712 series |
2008/11/03
|
| Driver |
Linux driver for DAQ card |
2008/11/18
|
| Faq |
Access the PCI DA&C cards at register level under DOS environment. |
2007/05/23
|
| Faq |
Is LabView driver available for Advantech I/O cards? |
2006/10/02
|
| Faq |
How to get the error message from the error code given? |
2007/05/22
|
| Faq |
Testing the 1MHz Sampling Rate of the PCI-1712 |
2006/11/06
|
| Faq |
How to set AI input mode (single ended or differential mode) within a program. |
2009/02/25
|
| Faq |
How to know the real sampling rate of AI, according to user set sampling rate |
2007/06/21
|
| Faq |
Checking the Version Information of DAS Cards |
2007/08/01
|
| Faq |
Solution of using Advantech DAQ cards under Matlab. |
2007/05/22
|
| Faq |
The information about the gain value setting in Labview |
2004/10/19
|
| Manual |
AI Floating Application Note |
2007/09/26
|
| Manual |
Pin Assignment of PCI-1712/1712L |
2008/06/25
|
| Online training |
How to control AI_O and DI_O of DA&C cards in GeniDAQ? |
2006/08/18
|
| Online training |
How to get the list of supporting examples for DA&C cards |
2006/12/05
|
| Online training |
How to use ActiveDAQ to develop VB program for DA&C cards |
2007/11/30
|
| Online training |
How to control Advantech DA&C cards with existing NI DAQ program |
2007/12/26
|
| Utility |
Calibration utility of DA&C card. |
2007/03/13
|
| Utility |
Wavescan2 and Wavescan2 Source Code |
2009/02/12
|
|
| PCI-1712L-AE |
Datasheet |
PCI-1712L_DS |
2009/02/13
|
| Driver |
Universal 32-bit Windows Driver for PCI-1712 series |
2008/11/03
|
| Faq |
Access the PCI DA&C cards at register level under DOS environment. |
2007/05/23
|
| Faq |
Is LabView driver available for Advantech I/O cards? |
2006/10/02
|
| Faq |
How to get the error message from the error code given? |
2007/05/22
|
| Faq |
How to set AI input mode (single ended or differential mode) within a program. |
2009/02/25
|
| Faq |
Checking the Version Information of DAS Cards |
2007/08/01
|
| Faq |
Solution of using Advantech DAQ cards under Matlab. |
2007/05/22
|
| Faq |
The information about the gain value setting in Labview |
2004/10/19
|
| Manual |
AI Floating Application Note |
2007/09/26
|
| Manual |
Pin Assignment of PCI-1712/1712L |
2008/06/25
|
| Online training |
How to control AI_O and DI_O of DA&C cards in GeniDAQ? |
2006/08/18
|
| Online training |
How to get the list of supporting examples for DA&C cards |
2006/12/05
|
| Utility |
Calibration utility of DA&C card. |
2007/03/13
|
| Utility |
Wavescan2 and Wavescan2 Source Code |
2009/02/12
|
|
| PCI-1742U-AE |
Datasheet |
PCI-1742U_DS |
2009/02/13
|
| Driver |
Universal 32-bit Windows Driver for PCI-1742U series |
2008/11/04
|
| Faq |
How to get the error message from the error code given? |
2007/05/22
|
| Faq |
How to set AI input mode (single ended or differential mode) within a program. |
2009/02/25
|
| Faq |
How to know the real sampling rate of AI, according to user set sampling rate |
2007/06/21
|
| Manual |
AI Floating Application Note |
2007/09/26
|
| Manual |
Pin Assignment of PCI-1742U |
2008/06/25
|
| Online training |
How to get the list of supporting examples for DA&C cards |
2006/12/05
|
| Online training |
How to use ActiveDAQ to develop VB program for DA&C cards |
2007/11/30
|
| Online training |
How to control Advantech DA&C cards with existing NI DAQ program |
2007/12/26
|
| Utility |
Wavescan2 and Wavescan2 Source Code |
2009/02/12
|
|
| AMAX-2210-AE |
Datasheet |
AMAX-2210 Series datasheet |
2008/02/27
|
| Datasheet |
AMAX-2210 Datasheet |
2008/05/30
|
| Datasheet |
AMAX-2210 Datasheet |
2008/05/30
|
| Driver |
32-bit DLL Drivers for AMONet Slave Modules (AMAX-2700 Series, AMAX-2210 Series, AMAX-2240 Series) |
2007/06/04
|
|
| AMAX-2212/J2S-AE |
Datasheet |
AMAX-2212/J2S datasheet |
2008/05/23
|
|
| AMAX-2211/PMA-AE |
Datasheet |
AMAX-2211/PMA datasheet |
2008/05/23
|
|
| AMAX-2213/YS2-AE |
Datasheet |
AMAX-2213/YS2 |
2008/05/23
|
|
| ADAM-4012-DE |
Datasheet |
ADAM-4012_DS |
2009/02/24
|
| Driver |
ADAM DotNET Class Library |
2009/03/12
|
| Driver |
Driver for ADAM-4000, ADAM-5000/485 series |
2006/04/03
|
| Faq |
Is there ADAM driver for Dasylab |
2006/08/15
|
| Faq |
Programming ADAM-4018 under VB, it is not working when reading value, the setting of TC will change |
2006/08/15
|
| Faq |
Can ADAM- 4K I/O modules work without ADAM-4520? |
2006/08/17
|
| Faq |
How ADAM series communicate with on Intouch and Labview |
2006/08/16
|
| Online training |
How to send ASCII command through terminal and VB program? |
2006/08/25
|
| Online training |
How to log data of ADAM-4118 through OPC server and DLL driver in ADAMView? |
2006/08/18
|
| Specification |
How about Zero Drift and Span Drift of ADAM modules? |
2004/01/22
|
| Utility |
Adam.NET Utility |
2009/04/08
|
| Utility |
Utility for ADAM-4000, ADAM-5000/485 series, Support 5000 Modbus |
2007/03/28
|
|
| ADAM-4016-A2E |
Datasheet |
ADAM-4016_DS |
2009/02/24
|
| Driver |
ADAM DotNET Class Library |
2009/03/12
|
| Driver |
Driver for ADAM-4000, ADAM-5000/485 series |
2006/04/03
|
| Faq |
Why the ADAM-4016 Strain Gauge only can work with excite voltage 5V? |
2004/01/22
|
| Faq |
Is there ADAM driver for Dasylab |
2006/08/15
|
| Faq |
Programming ADAM-4018 under VB, it is not working when reading value, the setting of TC will change |
2006/08/15
|
| Faq |
Can ADAM- 4K I/O modules work without ADAM-4520? |
2006/08/17
|
| Faq |
How ADAM series communicate with on Intouch and Labview |
2006/08/16
|
| Online training |
How to send ASCII command through terminal and VB program? |
2006/08/25
|
| Online training |
How to log data of ADAM-4118 through OPC server and DLL driver in ADAMView? |
2006/08/18
|
| Specification |
How about Zero Drift and Span Drift of ADAM modules? |
2004/01/22
|
| Specification |
What is the resolution of the analog output of ADAM-4016? |
2004/01/22
|
| Utility |
Adam.NET Utility |
2009/04/08
|
| Utility |
Utility for ADAM-4000, ADAM-5000/485 series, Support 5000 Modbus |
2007/03/28
|
|
| ADAM-4021-DE |
Datasheet |
ADAM-4021_DS |
2009/02/24
|
| Driver |
ADAM DotNET Class Library |
2009/03/12
|
| Driver |
Driver for ADAM-4000, ADAM-5000/485 series |
2006/04/03
|
| Faq |
Is ADAM-4021 possible to change the transfer data type? |
2004/01/22
|
| Faq |
Is there ADAM driver for Dasylab |
2006/08/15
|
| Faq |
Programming ADAM-4018 under VB, it is not working when reading value, the setting of TC will change |
2006/08/15
|
| Faq |
Can ADAM- 4K I/O modules work without ADAM-4520? |
2006/08/17
|
| Faq |
How ADAM series communicate with on Intouch and Labview |
2006/08/16
|
| Online training |
How to send ASCII command through terminal and VB program? |
2006/08/25
|
| Online training |
How to log data of ADAM-4118 through OPC server and DLL driver in ADAMView? |
2006/08/18
|
| Specification |
What is the maximum current that the ADAM-4021 can drive from its voltage outputs (+VOUT and -VOUT)? |
2004/01/22
|
| Utility |
Adam.NET Utility |
2009/04/08
|
| Utility |
Utility for ADAM-4000, ADAM-5000/485 series, Support 5000 Modbus |
2007/03/28
|
|
| ADAM-4013-DE |
Datasheet |
ADAM-4013_DS |
2009/02/24
|
| Driver |
ADAM DotNET Class Library |
2009/03/12
|
| Driver |
Driver for ADAM-4000, ADAM-5000/485 series |
2006/04/03
|
| Faq |
How to calibrate CJC of ADAM-4013/4018/4018M/5018? |
2004/01/22
|
| Faq |
How to check the ADAM-3013/4013 accuracy? |
2004/01/22
|
| Faq |
How to use ADAM-4013 in new GeniDAQ? |
2005/07/27
|
| Faq |
How to do the calibration on ADAM-4013? |
2004/01/22
|
| Faq |
ADAM-4013 accuracy specification change note. |
2004/01/22
|
| Faq |
Is there ADAM driver for Dasylab |
2006/08/15
|
| Faq |
Programming ADAM-4018 under VB, it is not working when reading value, the setting of TC will change |
2006/08/15
|
| Faq |
Can ADAM- 4K I/O modules work without ADAM-4520? |
2006/08/17
|
| Faq |
How ADAM series communicate with on Intouch and Labview |
2006/08/16
|
| Online training |
How to send ASCII command through terminal and VB program? |
2006/08/25
|
| Online training |
How to log data of ADAM-4118 through OPC server and DLL driver in ADAMView? |
2006/08/18
|
| Specification |
How about Zero Drift and Span Drift of ADAM modules? |
2004/01/22
|
| Specification |
How about the constant current for RTD of ADAM-4013/5013? |
2004/01/22
|
| Specification |
How about the accuracy in degree centigrade and ohm of ADAM-4013? |
2004/01/22
|
| Specification |
How to check the ADAM-4013 accuracy (Part II)? |
2004/01/22
|
| Specification |
Is there any way to use this NI RTD sensor with another range? |
2004/01/22
|
| Utility |
Adam.NET Utility |
2009/04/08
|
| Utility |
Utility for ADAM-4000, ADAM-5000/485 series, Support 5000 Modbus |
2007/03/28
|
|
| ADAM-4011-D2 |
Datasheet |
ADAM-4011D Data Sheet |
2007/02/26
|
| Datasheet |
ADAM-4011_DS |
2009/02/24
|
| Driver |
ADAM DotNET Class Library |
2009/03/12
|
| Driver |
Driver for ADAM-4000, ADAM-5000/485 series |
2006/04/03
|
| Faq |
How to calibrate CJC of ADAM-4013/4018/4018M/5018? |
2004/01/22
|
| Faq |
Is there a way to display the high and low alarm status of ADAM-4011D separately in VisiDAQ? |
2005/07/27
|
| Faq |
Does the LED display support control by Host PC command of ADAM-4011D? |
2004/01/22
|
| Faq |
How to verify $aaXxx & $aaY function of ADAM-4011? |
2004/01/22
|
| Faq |
Why get ripples result on ADAM-4011 readings? |
2004/01/22
|
| Faq |
How to read ADAM or Genie DDE server data and save to a column in Excel? |
2004/04/22
|
| Faq |
Is there ADAM driver for Dasylab |
2006/08/15
|
| Faq |
Programming ADAM-4018 under VB, it is not working when reading value, the setting of TC will change |
2006/08/15
|
| Faq |
Can ADAM- 4K I/O modules work without ADAM-4520? |
2006/08/17
|
| Faq |
How ADAM series communicate with on Intouch and Labview |
2006/08/16
|
| Faq |
Calculate the zero drift and span drift for temperature measuring. |
2007/01/25
|
| Online training |
How to send ASCII command through terminal and VB program? |
2006/08/25
|
| Online training |
How to log data of ADAM-4118 through OPC server and DLL driver in ADAMView? |
2006/08/18
|
| Specification |
How about Zero Drift and Span Drift of ADAM modules? |
2004/01/22
|
| Specification |
Allowable variations of thermocouple accuracy of ADAM-4011? |
2005/07/27
|
| Specification |
What is the correct drift value for ADAM-4011/4017/4018? |
2004/01/22
|
| Utility |
Adam.NET Utility |
2009/04/08
|
| Utility |
Utility for ADAM-4000, ADAM-5000/485 series, Support 5000 Modbus |
2007/03/28
|
|
| DVP-1412E |
Datasheet |
DVP-1412E_Datasheet |
2009/02/10
|
| Driver |
Driver for DVP-1412 |
2007/12/20
|
| Driver |
WIS Driver Version difference release note For DVP-1412E |
2007/12/20
|
| Manual |
Manual for DVP-1412 |
2007/02/09
|
| Utility |
SDK For DVP-1412E |
2007/12/17
|
|
| ADAM-4562-AE |
Datasheet |
ADAM-4562_DS |
2009/02/22
|
| Driver |
Driver for ADAM-4561 |
2008/08/29
|
|
| ADAM-4561-AE |
Datasheet |
ADAM-4561_datasheet |
2006/11/29
|
| Datasheet |
ADAM-4561_DS |
2009/02/24
|
| Driver |
Driver for ADAM-4561 |
2008/08/29
|
|
| EKI-1221-AE |
Bios |
The Latest FW of EKI-1221/1222/1224 |
2009/02/19
|
| Datasheet |
EKI-1221_DS |
2009/02/23
|
| Manual |
The user manual of EKI-1221/1222 |
2008/09/23
|
| Utility |
The Serial Device Server Configuration Utility For EKI-1521/1522/1524/1351/1352 |
2009/01/13
|
| Utility |
Windows.NET Framework 2.0 |
2008/11/13
|
|
| ADAM-4572-AE |
Datasheet |
ADAM-4572_DS |
2009/02/23
|
| Faq |
How to set subnet Mask when configure network devices? |
2006/08/08
|
| Faq |
EDG configuration utility only runs on an Ethernet network. |
2007/03/06
|
| Online training |
This video is to show you how to get Modbus data from ADAM-4572. |
2006/08/25
|
| Utility |
EDG Configuration Utility for EDG series & ADAM-4570/71/72/77/79 series |
2008/07/24
|
| Utility |
The Serial Device Server Configuration Utility For EKI-1521/1522/1524/1351/1352 |
2009/01/13
|
| Utility |
Windows.NET Framework 2.0 |
2008/11/13
|
|
| ADAM-4571L-CE |
Bios |
The Latest FW for ADAM-4571L-A/-BE |
2008/10/02
|
| Datasheet |
ADAM-4571L_DS |
2009/02/23
|
| Faq |
How to test ADAM-4571/70 default TCP Port number(5202). |
2006/07/10
|
| Faq |
EDG configuration utility only runs on an Ethernet network. |
2007/03/06
|
| Faq |
The FG (Frame Ground) only can be seen on the RJ-45, is it OK that RS-232 doesn’t have it? |
2007/08/01
|
| Utility |
EDG COMPort Mapping Utility for EDG series,ADAM-4570/71 |
2007/10/12
|
| Utility |
EDG Configuration Utility for EDG series & ADAM-4570/71/72/77/79 series |
2008/07/24
|
| Utility |
The Serial Device Server Configuration Utility For EKI-1521/1522/1524/1351/1352 |
2009/01/13
|
| Utility |
Windows.NET Framework 2.0 |
2008/11/13
|
|
| EKI-1521-AE |
Bios |
The Latest FW for EKI-1521/1522/1524 |
2009/01/12
|
| Datasheet |
EKI-1521_DS |
2009/02/20
|
| Utility |
The Serial Device Server Configuration Utility For EKI-1521/1522/1524/1351/1352 |
2009/01/13
|
| Utility |
Windows.NET Framework 2.0 |
2008/11/13
|
|
| ADAM-4571-BE |
Bios |
The Latest FW For ADAM-4570W/4571W |
2008/03/18
|
| Bios |
Firmware for ADAM-4571 |
2006/11/01
|
| Bios |
The Latest FW for ADAM-4571L-A/-BE |
2008/10/02
|
| Datasheet |
ADAM-4571W datasheet |
2008/02/25
|
| Datasheet |
ADAM-4571_DS |
2009/02/23
|
| Datasheet |
ADAM-4571L_DS |
2009/02/23
|
| Datasheet |
DataSheet of ADAM-4571S |
2006/11/29
|
| Faq |
Could 4570/71W work in an ESSID NETwork? |
2007/11/01
|
| Faq |
ADAM-4570 Compatibility report with third-party PLC |
2004/05/07
|
| Faq |
Can I use EDG-4508+/16+ to replace with equivalent ADAM-4570/71? |
2006/04/12
|
| Faq |
How to test ADAM-4571/70 default TCP Port number(5202). |
2006/07/10
|
| Faq |
Transmit Power and Antenna Spec for ADAM-4570W/71W. |
2007/11/06
|
| Faq |
How to use Notebook to connect ADAM-4571W/70W at Ad- Hoc mode. |
2006/12/14
|
| Faq |
Whether ADAM-4571W/70W support WPA encryption ? |
2007/01/02
|
| Faq |
Connecting and configuring ADAM-4570/71W in Ad-Hoc mode. |
2007/03/06
|
| Faq |
EDG configuration utility only runs on an Ethernet network. |
2007/03/06
|
| Faq |
The FG (Frame Ground) only can be seen on the RJ-45, is it OK that RS-232 doesn’t have it? |
2007/08/01
|
| Faq |
How to install ADAM-4571. |
2004/08/16
|
| Faq |
How to access data through firewall? |
2004/08/17
|
| Faq |
Use configuration utility to search ADAM-457X series modules. |
2004/08/17
|
| Manual |
Manual of ADAM-4570W/4571W |
2005/07/29
|
| Online training |
How to test the Auto-Reconnect function of virtual com port in EDG products |
2006/08/25
|
| Utility |
EDG COMPort Mapping Utility for EDG series,ADAM-4570/71 |
2007/10/12
|
| Utility |
EDG Configuration Utility for EDG series & ADAM-4570/71/72/77/79 series |
2008/07/24
|
| Utility |
The Serial Device Server Configuration Utility For EKI-1521/1522/1524/1351/1352 |
2009/01/13
|
| Utility |
Windows.NET Framework 2.0 |
2008/11/13
|
|
| EKI-1351-AE |
Bios |
The Latest FW of EKI-1351/1352 |
2009/02/19
|
| Datasheet |
EKI-1351_DS |
2009/02/23
|
| Utility |
The Serial Device Server Configuration Utility For EKI-1521/1522/1524/1351/1352 |
2009/01/13
|
| Utility |
Windows.NET Framework 2.0 |
2008/11/13
|
|
| PCL-740-AE |
Datasheet |
Datasheet of PCL-740 |
2007/03/02
|
| Driver |
PC-ComLIB, the DOS library for PCL-740 |
2006/02/28
|
| Driver |
ICOM Utility for PCL-740 |
2005/07/20
|
| Driver |
ISA Configure Tool for ISA interface ICOM Cards |
2008/03/04
|
| Driver |
Linux driver for ISA bus ICOM cards |
2004/11/24
|
| Faq |
How to install ICOM card under Windows 95/98? |
2004/11/03
|
| Faq |
How to install ICOM card under Windows NT without IRQ sharing? |
2004/11/03
|
| Faq |
Trouble shooting with ADAM-4000 series. |
2005/07/27
|
| Faq |
How to install ISA ICOM card under OS/2? |
2004/11/03
|
| Faq |
How to set non-standard baudrate of ISA ICOM card? |
2004/11/03
|
| Faq |
How to check the ICOM card? |
2004/11/11
|
| Faq |
How to connect 2 CURRENT-LOOP port (use PCL-740) for communication? |
2005/07/27
|
| Faq |
How to install PCL-740/741/743B/745B/746+ under Windows 95? |
2007/08/06
|
| Faq |
The ICOM cards installation guide |
2008/04/15
|
| Online training |
How to install ISA bus ICOM card under Windows system? |
2007/11/09
|
| Online training |
This video is to show you how to install ISA bus ICOM card under Windows system. |
2006/08/25
|
| Specification |
Pin assignment of ICOM card serial port connector. |
2004/11/03
|
| Specification |
Does PCL-740 offer RTS automatic control feature? |
2005/07/27
|
| Specification |
Does PCL-740/746+ offer RS-485 RTS automatic control? |
2005/07/27
|
| Specification |
What is time delay on RS-485 data transmit of PCL-740? |
2005/07/27
|
| Utility |
ICOM Tools for ICOM Cards |
2008/04/15
|
|
| PCI-1714UL-BE |
Datasheet |
PCI-1714UL_DS |
2009/02/18
|
| Driver |
Universal 32-bit Windows Driver for PCI-1714 series |
2008/11/03
|
| Faq |
How to get the error message from the error code given? |
2007/05/22
|
| Manual |
Pin Assignment of PCI-1714U/1714UL |
2008/06/25
|
| Online training |
How to use ActiveDAQ to develop VB program for DA&C cards |
2007/11/30
|
| Online training |
How to control Advantech DA&C cards with existing NI DAQ program |
2007/12/26
|
| Utility |
Wavescan2 and Wavescan2 Source Code |
2009/02/12
|
|
| EKI-2741LXI-AE |
Datasheet |
EKI-2741LXI_DS |
2009/02/25
|
|
| ADAM-6541/ST-AE |
Datasheet |
ADAM-6541/ST datasheet |
2007/03/07
|
| Specification |
ADAM-6521/41 series (Multi-mode) Fiber Transceivers Spec. |
2006/12/12
|
|
| EKI-2541MI-AE |
Datasheet |
EKI-2541MI Datasheet |
2008/05/27
|
| Datasheet |
EKI-2541MI Datasheet |
2008/05/27
|
|
| EKI-2541SI-AE |
Datasheet |
EKI-2541SI Datasheet |
2008/05/27
|
| Datasheet |
EKI-2541SI Datasheet |
2008/05/27
|
|
| PCI-1718HGU-AE |
Datasheet |
PCI-1718HGU datasheet |
2008/02/26
|
| Driver |
Universal 32-bit Windows Driver for PCI-1718 series |
2008/11/04
|
| Driver |
Linux driver for DAQ card (New Version) |
2009/02/06
|
| Faq |
How to get the error message from the error code given? |
2007/05/22
|
| Faq |
How to set AI input mode (single ended or differential mode) within a program. |
2009/02/25
|
| Manual |
AI Floating Application Note |
2007/09/26
|
| Manual |
Pin Assignment of PCI-1718HDU/1718HGU |
2008/06/25
|
| Online training |
How to get the list of supporting examples for DA&C cards |
2006/12/05
|
| Online training |
How to use ActiveDAQ to develop VB program for DA&C cards |
2007/11/30
|
| Online training |
How to control Advantech DA&C cards with existing NI DAQ program |
2007/12/26
|
| Utility |
Wavescan2 and Wavescan2 Source Code |
2009/02/12
|
|
| PCI-1710HGL-CE |
Datasheet |
PCI-1710HGL_DS |
2009/02/13
|
| Driver |
Universal 32-bit Windows Driver for PCI-1710 series |
2008/11/03
|
| Faq |
A/D calibration process for PCI-1710/1710HG |
2007/05/23
|
| Faq |
Access the PCI DA&C cards at register level under DOS environment. |
2007/05/23
|
| Faq |
Is LabView driver available for Advantech I/O cards? |
2006/10/02
|
| Faq |
The logic of the channel scan while combining "Differential" and "Single-Ended" |
2007/05/23
|
| Faq |
How to use internal and external trigger function of PCI-1710/1710L/1710HG/1710HGL/1711/1711L/1716/? |
2007/05/23
|
| Faq |
The definition of Register BASE+4/5 which is for multiplexer control. |
2007/05/23
|
| Faq |
The detail information of Register BASE+16 and BASE+17 which is digital I/O register control. |
2007/05/23
|
| Faq |
How to use ActiveDAQ to develop VB program for DA&C cards? |
2006/06/29
|
| Faq |
How to set AI input mode (single ended or differential mode) within a program. |
2009/02/25
|
| Faq |
Solution of using Advantech DAQ cards under Matlab. |
2007/05/22
|
| Faq |
The information about the gain value setting in Labview |
2004/10/19
|
| Manual |
PCI-1710 manaul |
2007/07/03
|
| Manual |
AI Floating Application Note |
2007/09/26
|
| Manual |
Pin Assignment of PCI-1710/1710L/1710HG/1710HGL |
2008/06/25
|
| Online training |
How to control AI_O and DI_O of DA&C cards in GeniDAQ? |
2006/08/18
|
| Online training |
How to get the list of supporting examples for DA&C cards |
2006/12/05
|
| Online training |
How to use ActiveDAQ to develop VB program for DA&C cards |
2007/11/30
|
| Online training |
How to control Advantech DA&C cards with existing NI DAQ program |
2007/12/26
|
| Utility |
Calibration utility of DA&C card. |
2007/03/13
|
| Utility |
Wavescan2 and Wavescan2 Source Code |
2009/02/12
|
|
| PCL-818HD-CE |
Datasheet |
PCL-818HD_DS |
2009/02/13
|
| Driver |
DOS Driver & Library for PCL-818 series. |
2005/05/13
|
| Driver |
Universal 32-bit Windows Driver for PCL-818 series |
2009/03/02
|
| Faq |
16-bit counter driver for PCL-818 series cards. |
2005/07/27
|
| Faq |
Why the PCL-818 DO work improper while work with "multiplexer daughter board"? |
2004/09/24
|
| Faq |
How to use "DMA data transfer method" of PCL-1800? |
2004/09/24
|
| Faq |
Why the function "DRV_TCMuxRead" influence the DO port of PCL-818H? |
2004/11/11
|
| Faq |
Does the PCL-816 capable to acquire two A/D channels simultaneusly? |
2004/11/11
|
| Faq |
How to connect PCLD-8115 to PCL-818L/HD/HG? |
2004/09/24
|
| Faq |
Is LabView driver available for Advantech I/O cards? |
2006/10/02
|
| Faq |
Why the PCL-818 frequency read funciton is not stable when work with 32-bit DLL drivers? |
2004/06/01
|
| Faq |
Why the PCL-818 counter function of 32-bit DLL drivers not work properly? |
2004/06/01
|
| Faq |
Why the PCL-812PG double buffer of DMA function never changed in 32-bit DLL drivers? |
2004/06/01
|
| Faq |
How to use PCL-1800 32-bit DLL drivers with BC++ and BC++ Builder? |
2004/09/27
|
| Faq |
Does Advantech support FIX or InTouch any driver for I/O DA&C cards? |
2004/09/27
|
| Faq |
Why the input channels on PCLD-789D cannot be switched when connected to PCL-818L/HD? |
2004/06/01
|
| Faq |
Do you have example programs of how to write this with two cards and DMA measuremet? |
2004/04/16
|
| Faq |
How about the "DMA data transfer mode" of PCL-818HD? |
2007/08/06
|
| Faq |
How to use ActiveDAQ to develop VB program for DA&C cards? |
2006/06/29
|
| Faq |
How to get the error message from the error code given? |
2007/05/22
|
| Faq |
How to set AI input mode (single ended or differential mode) within a program. |
2009/02/25
|
| Faq |
Checking the Version Information of DAS Cards |
2007/08/01
|
| Manual |
AI Floating Application Note |
2007/09/26
|
| Online training |
How to get the list of supporting examples for DA&C cards |
2006/12/05
|
| Online training |
How to use ActiveDAQ to develop VB program for DA&C cards |
2007/11/30
|
| Online training |
How to measure temperature with PCL-818HD & PCLD-789D? |
2006/08/18
|
| Specification |
Which card of PCL-818 series support bipolar and unipolar mixed? |
2004/09/24
|
| Specification |
What is the output impedance of PCI-1710? |
2005/08/25
|
| Specification |
Does the PCL-818 series cards support 4-20mA current output and bipolar output? |
2007/09/06
|
| Specification |
Why the analog measurement deviation from multimeter of PCL-818L is bigger than what the spec shows? |
2006/09/26
|
|
